Product manual

Page 5SKU 93884 For technical questions, please call 1-800-444-3353

Laser Controls

Horizontal/Dot Laser Button (12)

Vertical Laser Button (12)

Slide Switch (18)

Vertical Laser Button (12) - This button turns on the vertical laser line if the Slide

Switch (18) is in the upper position. The vertical laser is blocked while the Slide

Switch (18) is in the lower position.

Horizontal/Dot Laser Button (12) - This button turns on the horizontal laser line if

the Slide Switch (18) is in the upper position. It can be used along with the vertical

laser line to make a cross. When the Slide Switch (18) is in the lower position, the

laser is a dot instead.

Slide Switch (18) - The Slide Switch (18) determines laser operation.

WARNING! Point the end of the level away from people’s eyes when adjusting

the Slide Switch (18). If the Slide Switch is in the lower position, it can conceal

an illuminated laser beam.

If the Slide Switch (18) is in the upper position, the Vertical Laser Button will proj-

ect a vertical line and the Horizontal/Dot Laser Button will project a horizontal line.

When the Slide Switch (18) is in the lower position, the Vertical Laser Button will be

covered and the Horizontal/Dot Laser Button will project a simple dot beam.

WARNING! To conserve battery power and prevent accidents, move the Slide

Switch (18) to the upper position and verify that both lasers are off after use.

REV 07g