Product manual

Page 7For technical questions, please call 1-800-444-3353.SKU 69029

SAFETYMAINTENANCE BASIC WELDINGWELDING TIPS SETUP

Setup

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this

manual including all text under subheadings therein before set up or use of this product.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Turn the Power Switch off and unplug the welder before assembly.

Face Shield Assembly

1. Attach the handle to the Face Shield by lining up

the two rectangular tabs on the handle with the

corresponding holes in the face shield and

A. press the tabs through the holes and then

B. slide the tabs forward from the back,

locking the round tab in place.

2. Wear heavy-duty work gloves, the edges of the

filter lens may be sharp. Remove any protective

film from both sides of the filter lens. Slide the

filter lens into the helmet behind the holding tabs.

Make sure that the filter lens fits securely and

that light cannot leak around its edges.

Components and Controls

Grounding Clamp

Power

Switch

Power

Light

Current

Indicator

Electrode Holder

Overload

Light

Current

Knob

Handle

Face Shield

(viewed from front)

Round

Tab

Face Shield

(viewed from back)

Filter Lens