Product manual

Page 6 For technical questions, please call 1-800-444-3353. SKU 69029
SAFETY MAINTENANCEBASIC WELDING WELDING TIPSSETUP
Extension Cords
Do not use an extension cord on this welder.
Replacement Cords
1. A qualified electrician can install a UL-listed, 3
wire cords of the same thickness and length
as the one already installed on this welder.
2. Do not install a thinner or longer
cord on this welder.
3. Do not patch cords of any length together for this
item, patches may allow moisture to penetrate
the insulation, resulting in electric shock.
Symbology
Workpiece Ground Cable
Electrode Cable
Overheat Shutdown Indicator
Cooling Fan
Housing Ground Point
V~
Volts Alternating Current
A
Amperes
OCV
Open Circuit Voltage
KVA
Kilovolt Amperes
(Volts / 1000 * Amperes)
AWG
American Wire Gauge
Specifications
Power Input 240V~, 60Hz, 47A (A 50A dedicated circuit is required)
Max OCV 48V
Output Current 60 - 225 A, AC (270 A peak)
Capacity 1/16" to 1/4" thick and up mild steel
Rated Duty Cycle 20% @ 225 amps
Weldable Materials Steel, Cast Iron
Electrode Diameter 1/16" - 1/4"
Included Accessories Handheld face shield, Chipping hammer with wire brush, five electrodes