Product manual

Page 7For equipment technical questions, please call 1-888-866-5797.ITEM 62214

SAFETYSETUPOPERATIONMAINTENANCE

Set Up

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual

including all text under subheadings therein before set up or use of this product.

TO PREVENT SERIOUS INJURY:

Operate only with proper spark arrestor installed.

Operation of this equipment may create sparks that can start fires around dry vegetation.

A spark arrestor may be required.

The operator should contact local fire agencies for laws or regulations

relating to fire prevention requirements.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL STARTING: Turn the Power Switch

of the equipment to its “OFF” position, wait for the engine to cool, and unplug the spark

plug wire(s) before assembling or making any adjustments to the equipment.

Note: For additional information regarding the parts listed in the following pages,

refer to the Assembly Diagrams near the end of this manual.

Assembly

1. Attach the Handle (5) onto

the Frame (13) with the

Handle Knobs (12).

2. Attach the Spray Gun Holder (3)

to the Handle with a Knob (4).

3. Attach the Hose Hanger (7) to

the Handle with a Knob (4).

4. Attach the two Wand Holders (14)

to the Frame using Bolts (20).

Spray Gun

Holder

Wand Holder

Hose Hanger

Handle

Handle Knob

Knob

Bolt

Frame

Figure A