Product manual

Page 12 For technical questions, please call 1-888-866-5797. ITEM 69746

SAFETY SETUP OPERATION MAINTENANCE

Manual Start

1. To start a cold engine, move the Choke to the

CHOKE position.

To restart a warm engine, leave the

Choke in the RUN position.

2. Open the Fuel Valve.

3. Slide the Throttle or Speed Control Lever to 1/3

away from the SLOW position (the “turtle”).

4. Turn the Engine Switch on.

5. Grip the Starter Handle of the Engine loosely and pull

it slowly several times to allow the gasoline to flow into

the Engine’s carburetor. Then pull the Starter Handle

gently until resistance is felt. Allow Cable to retract fully

and then pull it quickly. Repeat until the engine starts.

Note: Do not let the Starter Handle snap back against the engine.

Hold it as it recoils so it doesn't hit the engine.

CHOKE RUN

OFF