Product manual

Page 5For technical questions, please call 1-800-444-3353.Item 61717
SAFETYOPERATIONINSPECTION INSTALLATION
Specifications
Electrical Rating
120VAC / 60Hz / 18A
20A Dedicated Circuit Required
Rated Capacity 2000 lb double line 1000 lb single line
Lifting Speed 16.5 FPM double line 33 FPM single line
Wire Rope Length 40'
Wire Rope Diameter 7/32"
Duty Cycle 20%*
*This Hoist has a 20% duty cycle. This means that the Hoist may only be run up to 2 minutes at a time
and then it must be allowed to rest for at least 8 minutes before further use.
Installation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the
following pages, refer to Parts List and Diagram on page 10.
1. The supporting structure the hoist is mounted to
(including trolley, monorail, or crane)
must be designed to withstand the loads and
forces imposed by the hoist for the rated load.
2. Place the two Hanging Clamps over the supporting
structure where the hoist will be mounted.
3. Have an assistant hold the Hoist in place and attach
the Hanging Clamps to the Housing using the
Bolts, Lock Washers, Washers and Nuts supplied.
4. Once the Hoist is in position, tighten Nuts firmly.
4006565