Table of contents SAFETy Safety ......................................................... 2 Specifications ............................................. 5 Installation .................................................. 5 Operation .................................................... 6 Inspection ................................................... 8 Parts List and Diagram .............................. 10 Warranty ....................................................
Installation Specific Safety Information 4. Do not install where the load hook can be lowered beyond the rated hook travel under normal operating conditions. 2. Install in location that allows the operator to move and stay clear of the load. 5. DO NOT USE AN EXTENSION CORD. An extension cord would cause a drop in line voltage resulting in loss of power and overheating. 3. Locate pendant controls at a convenient level above the operating floor. 6.
Grounding Instructions SAFETy TO pREVENT ELEcTRIc SHOcK AND DEATH FROM INcORREcT GROUNDING WIRE cONNEcTION READ AND FOLLOW THESE INSTRUcTIONS: 1. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This hoist is equipped with an electric cord having an equipment-grounding conductor and a grounding plug.
Specifications Rated Capacity Lifting Speed 2000 lb double line 1000 lb single line 16.5 FPM double line 33 FPM single line Wire Rope Length SAFETy 120VAC / 60Hz / 18A 20A Dedicated Circuit Required Electrical Rating 4006565 40' Wire Rope Diameter 7/32" Duty Cycle 20%* Installation Instructions Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Operation Instructions Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. SAFETy TO pREVENT SERIOUS INJURy: Operation of a vertical hoist involves more than depressing the Up or DOWN control.
Applying the Load 2. Attach the load to the load hook securely by properly rated, suitable means, such as chains, shackles, hooks, lifting slings, etc. Load must be attached to prevent accidental disconnection. 3. Properly seat the sling or other device in the base (bowl or saddle) of the hook (see the left side diagram on Figure A). Do not allow the hook hitch to support any part of the load. 4. Do not apply the load to the point of the hook (shown in Figure A on the right side diagram). 5.
Inspection, Testing, and Maintenance procedures not specifically explained in this manual must be performed only by a qualified technician. SAFETy TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Remove any load, release the operating controls, and detach the power cord before performing any inspection, maintenance, or cleaning procedures. TO pREVENT SERIOUS INJURy FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
11. Periodic (Thorough) Hoist Rope Inspection Check entire length of rope hoist rope as follows: Inspect the individual outer wires in the strands of the rope. Keep a record of any deterioration resulting in appreciable loss of original strength, such as described below, and have a qualified technician determine whether further use of the rope would constitute a hazard: a. Check points listed in Frequent Hoist Rope Inspection on page 8. b.
pLEASE READ THE FOLLOWING cAREFULLy SAFETy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
INSpEcTION OpERATION INSTALLATION SAFETy Assembly Diagram Record product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 11 For technical questions, please call 1-800-444-3353.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
