Product manual

Page 4For technical questions, please call 1-800-444-3353.SKU 42950
Use in accordance with the 12.
Department of Transportation (DOT)
regulations. Information about DOT
regulations can be found at www.dot.
gov/regulations.html
Read manual before installation and/13.
or use.
Maintain labels and nameplates on 14.
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
This product is not a toy. Children 15.
should be kept at a safe distance,
and never allowed to operate the
Trailer Jack.
Follow all state regulations for safety 16.
and towing when using Trailer Jack,
including using safety chains securely
attached to the towing vehicle when
the trailer is hooked to the vehicle.
Not for aircraft purposes.17.
Trailer Jack must always be in the up 18.
position (horizontal to ground) when
towing the trailer.
The warnings, precautions, 19.
and instructions discussed in
this instruction manual cannot
cover all possible conditions and
situations that may occur. It must
be understood by the operator that
common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
INSTRUCTIONS.
SPECIFICATIONS
Weight Capacity 2,000 lb.
Maximum Height 23-5/8” (Extended)
Minimum Height 14” (Retracted)
Lift Distance ± 9-5/8”
Net Weight 9.9 Lbs.
Trailer Jack must be welded to side of
straight trailer tongue. Once welded to the
trailer, the Trailer Jack is an effective aid to
hitching, unhitching, leveling and moving
the trailer. The Trailer Jack can be used
on farm duty trailers as well as recreational
boat trailers.
The Trailer Jack is designed for permanent
attachment to the trailer tongue, and can
be available for use wherever the trailer
goes.
UNPACKING
When unpacking, make sure item
is intact and undamaged. If parts are
missing or broken, call Harbor Freight
Tools at 1-800-444-3353.
SET UP INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.