Product manual

Page 4 For technical questions, please call 1-888-866-5797. Item 69514
Specifications
Specifications
Jack Capacity 8 Ton
Boom Positions
2 Ton 84 IN.
1-1/2 Ton 89 IN.
1 Ton 95 IN.
1/2 Ton 100 IN.
Meets 2005 ANSI/ASME PALD standards.
Assembly
Part
#32
14x90
mm
Part
#8
14x100
mm
Part
#11
16x80
mm
Part
#20
16x90
mm
Part
#15
16x100
mm
Part
#16
16x110
mm
Part
#2
12x80
mm
Part
#25
8x20
mm
Part
#29
8x12
mm
TO PREVENT SERIOUS INJURY AND DEATH: The correct bolts must be used during
assembly. Carefully compare bolts to Bolt Identification illustration above and the measurements shown in
the parts list and assembly diagrams near the end of this manual to make sure that the correct bolts are used
in the correct place.
WARNING! For safety and ease of assembly, use two people to assemble the Shop Crane.
CAUTION! DO NOT TIGHTEN ANY BOLTS UNTIL YOU ARE FULLY FINISHED WITH ASSEMBLY.
OTHERWISE PARTS WILL NOT LINE UP PROPERLY.
SAFETY OPERATION MAINTENANCESETUP