Product manual

Page 2 For technical questions, please call 1-888-866-5797. Item 69514
Table of Contents
Safety ......................................................... 2
Specifications ............................................. 4
Setup .......................................................... 4
Operation .................................................... 7
Maintenance ............................................... 8
Parts Lists and Diagrams .......................... 10
Warranty .................................................... 12
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INFORMATION
General Safety Warnings
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
1. Study, understand, and follow all instructions
before operating this device.
2. Do not exceed 2 ton rated capacity
for the Engine Crane.
3. Use only on hard, level surfaces.
4. Before moving, lower the load to
the lowest possible point.
5. Use only sling or chains with a rated capacity
greater than the weight of the load being lifted.
6. Do not allow load to swing or drop
violently while lowering or moving.
7. Do not make any alterations or modifications to
Engine Crane. Do not adjust safety valve.
8. Properly extend leg extensions and secure
boom in proper setting before use.
9. Follow capacities marked on boom; capacity
decreases as boom lengthens.
10. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.
11. Verify replacement jack has same rating,
mounting points and maximum length.
12. Do not use for aircraft purposes.
SAFETY OPERATION MAINTENANCESETUP