Product manual

Page 4SKU 44991

up. Otherwise, the extension cord could melt and catch re, or cause electrical

damage to the tool. This tool requires use of an extension cord of 0 to 10 amps

capability (up to 50 feet), with wire size rated at 18 AWG. Longer extension cords

require larger size wire. If you are using the tool outdoors, use an extension cord

rated for outdoor use. (signied by “WA” on the jacket).

21. Maintenance. For your safety, service and maintenance should be performed

regularly by a qualied technician.

Note: Performance of this tool (if powered by line voltage) may vary depending on

variations in local line voltage. Extension cord usage may also affect tool performance.

Warning: The warnings, cautions, and instructions discussed in this instruction manual

cannot cover all possible conditions and situations that may occur. It must be under-

stood by the operator that common sense and caution are factors which cannot be

built into this product, but must be supplied by the operator.

Unpacking

When unpacking, check to make sure the following parts and accessories are included.

If any parts are missing or broken, please call Harbor Freight Tools at the number on the

cover of this manual as soon as possible.

Installation

1. Place the machine on a level, at, and heavy work table or bench; sufcient to support

weight and use of product and with sufcient light, and enough side room to allow

movement of the Working Table (#19).

2. Secure the machine to the appropriate table or bench using four hex screws (not

supplied), by screwing them through the base mounting holes.

REV 11/02

ITEM DESCRIPTION

Large Wrench

B 13 mm Drill Chuck with Taper Shank

C Oil Bottle

D Fixing Pin

E L - Hex. Wrenches, S: 3, 4, 5, 6

F Socket Head Wrench, D: 45-52

G Double-end Wrenches, 8-10, 14-17, 17-19

H Chuck Key

I Handle

J T-nut

K Fuse, 5A (110 VAC)

L Dr aw Ba r