Specifications Power Source 12 VDC only (Negative Ground Only) Features 2 Combination Submersible, Class A Stop, Tail, Turn Signals, License Plate Bracket, 4 ft. Trunk Harness and 25 ft. Y-Harness. Light Type 18 LEDs Per Light (not serviceable) Page 2 For technical questions, please call 1-888-866-5797.
Important Safety Information Installation Precautions 1. Install only according to these instructions. Improper installation can create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during installation. 3. Keep installation area clean and well lit. 4. Keep bystanders out of the area during installation. 5. Do not install when tired or when under the influence of drugs or medication. 6. 7. 8.
Installation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. Towing Vehicle Installation Note: Use the BLUE Splice Connectors to make the connections in steps 1-3. 1. Connect the BROWN wire of the Trunk Harness (5) to the towing vehicle’s Running Lights wire. 3. Connect the GREEN wire of the Trunk Harness to the vehicle’s Right Stop & Turn light. 2.
Wiring Diagram C C Connect Green wire to Vehicle R.H. Stop & Turn C Connect Yellow wire to Vehicle L.H. Stop & Turn Connect White wire to Vehicle Frame Connect Brown wire to Vehicle Running Lights Trailer Ground Point Brown Wire Splice Connector Green Wire White Wire C Yellow Wire 3 Rear Markers ( Red) Required for Trailers over 80’ Wide ( Not Included) Right Tail Light C Left Tail Light & License Bracket Window underneath to light up license plate.
Operation Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY OR DEATH FROM DRIVING HAZARDS: Test operation of all lights before every use. Troubleshoot and repair wiring properly before using. Do not use while trailer light operation does not match vehicle light operation, if any lights do not light up, or if any lights flicker.
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND INSTALLATION DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
