Product manual

Page 10 For technical questions, please call 1-888-866-5797. Item 69917
SAFETY OPERATION MAINTENANCESETUP
Specifications
Electrical Rating 120VAC / 60Hz / 2.0A
No Load Speed 12,000 OPM
Paper Attachment Hook and Loop
Max. Accessory Diameter 5″ (127 mm)
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Make sure that the Power Switch is in the off-position and unplug the tool from
its electrical outlet before performing any procedure in this section.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Assembly
1. Slide the Dust Bag onto the back of the
Sander. Snap it in place using firm pressure.
2. The collection of the dust will only work
if the sandpaper has holes that line up
with the 8 dust collection holes in the
Backing Pad. There are 4 other holes
in the Backing Pad for the Screws that
attach the Backing Pad to the Sander.
Functions
Power
Switch
Dust Bag
Power Cord
Backing
Pad
3042597