Product manual

Page
7
For technical questions, please call 1-800-444-3353.
Item
61245
SAFETYOPERATIONMAINTENANCE SETUP
Setup - Before Use:
Read the
ENTIRE
IM
P
ORTANT SAFET
Y
INFORMATION
Y INFORMATIONY
section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Functions
Inlet
Fittings
Switch
(hidden from
this angle)
Oil Fill
P
lug
Oil Drain
P
lug
Oil Sight
Glass
Operating Instructions
Read the
ENTIRE
IM
P
ORTANT SAFET
Y
INFORMATION
Y INFORMATIONY
section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Tool Set Up
1.
Before
operating
the
Vacuum
Pump,
check
the
oil
level
by
placing
the
Vacuum
Pump
on
a
flat,
level
surface.

Observe
the
Oil
Sight
Glass.

The
oil
should
be
at
the
fill
line
on
the
Oil
Sight
Glass.
2.
If
oil
is
needed,
unscrew
the
Oil
Fill
Plug
and
add
oil
through
the
hole
under
the
fitting.

Use
a
low
viscosity
vacuum
pump
oil
(i.e.,
HFV-46).
3.
Inspect
the
sealing
O-Ring
each
time
the
Oil
Fill
Plug
is
removed.

Look
for
tears,
cracks,
and
other
damage.

Replace
if
needed.
4.
Replace
the
Oil
Fill
Plug
and
tighten
securely
to
prevent
oil
from
escaping
under
pressure
during
use.
OP
ERATION
OPERATION