Table of contents SAFETy Safety .................................................2 Specifications .....................................7 Setup ..................................................8 Operation ............................................9 Maintenance ......................................10 Parts List and Diagram ......................11 Warranty ............................................12 WARNING SyMBOLS AND DEFINITIONS This is the safety alert symbol.
Electrical Safety Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 3. prevent unintentional starting. Ensure the Trigger is in the off-position before connecting to power source, picking up or carrying the tool. Carrying power tools with your finger on the Trigger or energizing power tools that have the Trigger on invites accidents. 4. Remove any adjusting key or wrench before turning the power tool on.
SAFETy 5. Maintain power tools. check for 7. Use the power tool, accessories and misalignment or binding of moving tool bits etc. in accordance with these parts, breakage of parts and any other instructions, taking into account the condition that may affect the power tool’s working conditions and the work to operation. If damaged, have the power be performed. Use of the power tool for tool repaired before use.
SAFETy The battery Charger gets hot 9. People with pacemakers should during use. The Charger’s heat consult their physician(s) before use. can build up to unsafe levels and Electromagnetic fields in close proximity to create a fire hazard if it does not heart pacemaker could cause pacemaker receive adequate ventilation, due to an interference or pacemaker failure. electrical fault, or if it is used in a 10. WARNING: Handling the cord on this hot environment.
Grounding SAFETy TO pREVENT ELEcTRIc SHOcK AND DEATH FROM INcORREcT GROUNDING: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the charger. Do not use the charger if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
1/4″ Hex Impact Rate 3000 BPM Maximum Torque 360 in. lb. Battery 1300 mAh, 18V, NiCd ITEM 68413 (sold separately) Charger ITEM 68420 (sold separately) MAINTENANcE OpERATION SETUp Chuck SAFETy Specifications Item 61424 For technical questions, please call 1-800-444-3353.
Setup - Before Use: SAFETy Read the ENTIRE IMpORTANT SAFETy y INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Functions chuck huck Sleeve SETUp Direction Switch chuck huck Work Light OpERATION Trigger Battery MAINTENANcE (ITEM 68413 (sold separately)) Page 8 For technical questions, please call 1-800-444-3353.
Operating Instructions SAFETy Read the ENTIRE IMpORTANT SAFETy y INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO pREVENT REVENT SERIOUS INJUR INJURy y FROM AccIDENTAL OpERATION: Make sure that the Trigger is in the off-position and remove the Battery pack before adjusting tool or installing accessories. charging 2.
Maintenance and Servicing SAFETy procedures not specifically explained in this manual must be performed only by a qualified technician. TO pREVENT REVENT SERIOUS INJUR INJURy y FROM AccIDENTAL OpERATION: Make sure that the Trigger is in the off-position and remove the Battery pack before performing any inspection, maintenance, or cleaning procedures. TO pREVENT REVENT SERIOUS INJUR INJURy y FROM TOOL FAILURE: Do not use damaged equipment.
part Description Bolt Impact Head Motor Asm. Left Housing Wire Terminal Asm. Terminal Qty 4 1 1 1 4 1 2 part 8 9 10 11 12 13 Description Battery Pack (Item 68413, sold separately) Screw Right Housing Trigger Direction Switch LED Work Light Qty 1 7 1 1 1 1 MAINTENANcE OpERATION SETUp 1 2 3 4 5 6 7 SAFETy parts List and Diagram Item 61424 For technical questions, please call 1-800-444-3353.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
