Product manual

Page 11For technical questions, please call 1-888-866-5797.Item 96290
SAFETYOPERATIONMAINTENANCE SETUP
Cutting Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
Inspect tool before use, looking for leaking, damaged, loose, and missing parts.
If any problems are found, do not use tool until repaired.
1. Set up for cutting according to
instructions on pages 6-9.
2. Close all valves on the Torch Handle
and Cutting Attachment securely.
Pre-heat
Oxygen Valve
Acetylene (GAS)
Torch Valve
Cutting Step 2: Close Valves
3. Adjust the Acetylene and Oxygen Regulators to their
proper working pressures,
see Table A on page 10.
DO NOT EXCEED 15 PSI
ACETYLENE PRESSURE.
Acetylene
Regulator
Acetylene Delivery Pressure
DO NOT EXCEED 15 PSI.
Oxygen
Regulator
Oxygen Delivery
Pressure
Cutting Step 3: Set Cutting Pressures
See Table A on page 10.
4. Hold the Torch Handle in one hand and a
striker (not included) in the other hand.