Product manual

Page 17
For technical questions, please call 1-800-444-3353.
Item 69897
SAFETYOPERATIONMAINTENANCE ASSEMBLY
Specifications
Maximum Capacity Payload
Maximum Capacity Payload
1,720 lb.
Bed Dimensions
4 Ft. x 8 Ft.
Hitch Ball Size
2"
Wheel Rim Diameter/Width
12" x 4"
Quantity Wheel Lug Nuts
Quantity Wheel Lug Nuts
5 Per Wheel
Tire Size
5.30-12
Required Tire Air Pressure
Required Tire Air Pressure
80 PSI, Cold
Hitch Class
II
Operating Instructions
Read the
ENTIRE
IMPORTANT SAFETY INFORMATION
section at the beginning of this
manual including all text under subheadings therein before set up or use of this Trailer.
Before each use
1.
Check Tire condition and air pressure.
2.
Make sure wheel lug nuts/bolts
are properly tightened.
3.
Make sure hitch, coupler, draw bar, and other
equipment that connect the trailer and the tow
vehicle are properly secured and adjusted.
4.
Make sure wiring is properly connected —
not
touching the
road, but
loose enough to make
turns without disconnecting or damaging the wires.
5.
Make sure all running lights, brake lights,
turn
signals, and hazard lights are working.
6.
Check that all items are securely
fastened on and in the trailer.
7.
Be sure the trailer jack, tongue support, and any
attached stabilizers are raised and locked in place.
8.
Check load distribution to make sure
the tow vehicle and trailer are properly
balanced front to back and side to side.
9.
Check side- and rear-view mirrors to
make sure you have good visibility.
10.
Check routes and restrictions on bridges and tunnels.
11.
Make sure you have wheel chocks and jack stands.
12.
Check trailer for loose bolts and nuts,
structural
cracks and bends, and any other
condition that may affect its safe operation.
Do
not
use
the
Trailer even if minor damage appears.