Product manual

Page 6 For technical questions, please call 1-800-444-3353. SKU 69259
MAINTENANCE AND
SERVICING
Procedures not specifically
explained in this manual
must be performed only by
a qualified technician.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the OFF the Laser Level
before performing any
inspection, maintenance, or
cleaning procedures.
TO PREVENT SERIOUS INJURY
FROM TOOL FAILURE:
Do not use damaged equipment.
If abnormal noise or vibration
occurs, have the problem
corrected before further use.
Installing and Removing Batteries
1. Remove the Battery Cover (13)
located under the On/Off Button (9).
See Figure 7, below.
Figure 7
Battery Cover
(13)
2. The Laser Level uses two (2) “AAA”
batteries. Remove the old batteries
and insert two new batteries.
See Figure 8, below.
Figure 8
“AAA”
Batteries
3. WARNING! Verify batteries are inserted
according to indicated polarity (so that
positive and negative ends match the
diagram on the end of the Laser Level).
4. Replace the Battery Cover (13).To
prevent accidents, turn off the tool and
disconnect its power supply after use.
Cleaning, Maintenance,
and Lubrication
1. BEFORE EACH USE, inspect the
general condition Laser Level. Check
for loose hardware, misalignment or
binding of moving parts, cracked or
broken parts, and any other condition
that may affect its safe operation.
2. AFTER USE, wipe external surfaces
of the tool with clean cloth.
3. Store the Laser Level indoors
and out of children’s reach.