Product manual

Page 3For technical questions, please call 1-800-444-3353.SKU 69259
9. Keep children and bystanders away
while operating Laser Level.
10. Inspect before every use; do not
use if parts loose or damaged.
11. Stay alert, watch what you are doing
and use common sense when operating
Laser Level. Do not use Laser Level
while you are tired or under the influence
of drugs, alcohol or medication.
12. Dress properly. Do not wear
loose clothing or jewelry. Keep
your hair, clothing and gloves
away from moving parts.
13. Maintain labels and nameplates
on the tool. These carry important
safety information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
14. WARNING: This product contains
or, when used, produces a chemical
known to the State of California to
cause cancer and birth defects or other
reproductive harm. (California Health
& Safety Code § 25249.5, et seq.)
15. The warnings, precautions, and
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may occur.
It must be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
SAVE THESE
INSTRUCTIONS.
SPECIFICATIONS
Laser Range Projects Up to 1500 ft.
Max. Tripod Height 42″
Swivel Head Range 360°
Batteries (2) AAA (included)
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
Max. Output: <5 mW,
Wavelength: 650 nm ± 10 nm
CLASS IIIa LASER PRODUCT
This product complies with
21 CFR 1040.10 and 1040.11
Diode Mfr.: Sean & Stephen Corp.
4F, NO3, Lane 335, Sec 4, Hsin-Yi Rd.
Taipen, China
Manufacture Date: ___________, _______
UNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight
Tools at 1-800-444-3353 as soon as possible.
INSTRUCTIONS FOR
PUTTING INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at
the beginning of this manual
including all text under subheadings
therein before set up or use of this
product.
TO PREVENT SERIOUS INJURY FROM
ACCIDENTAL OPERATION:
Turn the Power Switch to Off
before adjusting Laser Level..
Note: For additional information
regarding the parts listed in the following
pages, refer to the Assembly Diagram
near the end of this manual.
REV 10k