Specifications Load Capacity 1500 lb. Ramp Length 69" Ramp Width 45" Important Safety Information 1. Before use: 5. a. Read and understand manual. a. as ladder, b. Inspect before every use; do not use if parts loose or damaged. b. if tailgate on carrying vehicle is higher than 34”, or c. Turn vehicle’s ignition OFF and set parking brake. c. to load vehicle with wheel width wider than ramp. d. Clean dirt, oil and debris off ramp(s) and allow ramp(s) to dry. 6. f.
13. All persons not involved in the loading process must stand clear of the loading ramps. Keep children away. Children must not be allowed in the work area. 14. Check maximum tailgate weight capacity. Do not exceed tailgate capacity if less than 1,000 lb. 15. Avoid working alone. If an accident happens, an assistant can bring help. 16. Keep work area clean and well lit. Cluttered and dark areas invite injuries. 17. Store idle equipment. When not in use, store ramps in a dry location to inhibit rust. 23.
Setup and Operation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY: Make sure the vehicle is turned off and in gear or park, with the emergency brake engaged and the wheels blocked. Make sure the Ramp is completely open and the securing chains and hooks are secured onto the vehicle. Make sure the Ramp is clean and dry before loading.
ATV Loading and Unloading • Do not use this ramp to load or unload any vehicle that weighs more than 1500 lb. • Do not use this ramp to load or unload any vehicle that is wider than the ramp. • Do not use this ramp to load or unload any vehicle that is carrying gear on its racks. • Do not use this ramp if the tailgate on the vehicle being loaded or unloaded is higher than half the ramp’s length (34").
Expert Loading Directions Only for individuals certified by the ASI (ATV Safety Institute) By using directions in this section, you are agreeing that you are an ASI trained, certified rider and that you understand that your safety in performing this procedure is based on your ability to control the vehicle. 1. Have an assistant monitor the Ramp tongue for slippage on the tailgate. 2. Confirm that the weight of the ATV and rider combined is still less than the 1500 lb. capacity of this ramp. 3.
Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY: Remove the ramp from the vehicle before performing any maintenance or service. Do not use damaged equipment. If Ramp is damaged have the problem corrected before further use. Cleaning, Maintenance, and Lubrication 1. BEFORE EACH USE, inspect the general condition of the Ramp. Check for: 2. Clean the ramp after each use.
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
