Product manual

Page 14 For technical questions, please call 1-800-444-3353. Item 60564
SAFETY OPERATION MAINTENANCESETUP
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its
electrical outlet before assembling or making any adjustments to the tool.
TO PREVENT SERIOUS INJURY:
DO NOT OPERATE WITH ANY GUARD DISABLED, DAMAGED, OR REMOVED.
Saw Blade Installation
1. Fully open the Upper Wheel Guard (29A)
and the Lower Wheel Guard (69A).
2. Remove the Spring Pin (37-1A), Table Insert
(37A) and Table Pin (38A). See Figure 22, right.
3. Turn the Blade Adjusting Knob
(14A) counterclockwise 5-10 full
turns. See Figure 23, right.
4. With both hands, hold the Saw Blade with its teeth
pointing downward and away from your body.
Then insert one side of the Saw Blade (36A)
back side first and through the slot in the
Table (39A). See Figure 24, right.
Blade Adjusting
Knob (14A)
Figure 22
Spring Pin (37-1A)
Table Insert (37A)
Table
Pin
(38A)
Figure 23
Figure 24
Table
(39A)
Saw
Blade
(36A)