Product manual

Page 5
For technical questions, please call 1-800-444-3353.
Item 69739
SAFETYOPERATIONINSPECTION INSTALLATION
Specifications
Electrical Rating
120V~ / 60Hz / 11.4A
Rated Capacity
1320 lb.
double line
660 lb. single line
Lifting Height
19′
double line
19′ double line19′
39
′
single line
′ single line′
Lifting Speed
13 FPM
double line
26
FPM
single line
Duty Cycle
20%*
*This Hoist has a 20% duty cycle. This means that the Hoist may only be run up to 2 minutes at a time
and then it must be allowed to rest for at least 8 minutes before further use.
Installation Instructions
Read the
ENTIRE
IM
P
ORTANT SAFET
Y
INFORMATION
Y INFORMATIONY
section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note:
For additional information regarding the parts listed in the following
For additional information regarding the parts listed in the following
pages,
refer to
Parts
List and Diagram
on page
10.
1.
The supporting structure the hoist is mounted to
(including trolley, monorail, or crane)
must be designed to withstand the loads and
forces imposed by the hoist for the rated load.
2.
Place the two Hanging Clamps over the supporting
structure where the hoist will be mounted.
3.
Have an assistant hold the Hoist in place and attach
the Hanging Clamps to the Housing using the Bolts,
Lock Washers, Washers and Nuts supplied.
4.
Once the Hoist is in position, tighten Nuts firmly.
4005467