Table of Contents Safety ......................................................... 2 Maintenance ............................................... 7 Specifications ............................................. 5 Parts List and Diagram .............................. 10 Operation .................................................... 6 Warranty .................................................... 12 SAFETY WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol.
IMPORTANT SAFETY INFORMATION WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
Air Compressor Safety Warnings SAFETY 1. Risk of fire or explosion - do not spray flammable liquid in a confined area or towards a hot surface. Spray area must be well-ventilated. Do not smoke while spraying or spray where spark or flame is present. Arcing parts - keep compressor at least 20 feet away from explosive vapors, such as when spraying with a spray gun. 2. Risk of bursting - do not adjust regulator higher than marked maximum pressure of attachment. 3.
Specifications 12VDC 100 PSI 0.88 CFM 6-5/8" L x 2-7/8" W x 5-1/4" H F15A250V SAFETY Electrical Rating Maximum Air Pressure Air Flow Capacity Dimensions Fuse Components and Controls Air Hose Pressure Gauge Cigarette Lighter Adaptor Power Switch OPERATION SETUP Handle Air Nozzle MAINTENANCE Nozzles Item 61788 For technical questions, please call 1-888-866-5797.
Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. SAFETY 1. Turn the Power Switch to the “OFF” position. 2. Connect the Air Hose to the Compressor. 3. Select the desired Nozzle accessory and attach it to the end of the Air Nozzle. 4. Turn on the car engine. a. Plug the Cigarette Lighter Adapter into the vehicle’s cigarette lighter socket. 5.
Maintenance and Servicing SAFETY Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT INJURY FROM ACCIDENTAL OPERATION: Turn the Power Switch “OFF” and disconnect from power source before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY FROM COMPRESSOR FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. 1.
Troubleshooting Problem Decreased output Possible Causes SAFETY 1. Not enough air pressure and/or air flow. 2. Air leaking from loose housing or connections. 3. Mechanism contaminated. Severe air leakage 1. Cross-threaded housing (Slight air leakage components. is normal, especially on older 2. Loose housing. tools) No output 3. Dirty, worn or damaged valve. 1. Poor connection. SETUP 2. Power Switch in Off (O) position. 3. Run-down battery. 4. Blown Fuse. Likely Solutions 1.
MAINTENANCE OPERATION SETUP THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Parts List and Diagram Parts List SAFETY Part SETUP OPERATION 1 1A 1B 1C 1D 1E 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Description Cigarette Lighter Adaptor Spring* Ring* Glass Fuse (F15A250V)* Contact Pin* Bezel* Power Cord Screw (3x25) Power Switch Rear Cover Shockproof Pad Connection Cap Screw (4x102) Spring Washer (4mm) Washer (4mm) Power Cord Sleeve Overload Protector Connection Wire Motor Rear Cover Brush Holder Motor Housing Bearing (608z) Spring Washer Rotor Sprin
SAFETY Assembly Diagram 50 49 48 47 46 45 53 54 44 43 42 40 39 55 56 57 SETUP 41 52 51 38 37 33 31 25 26 27 28 29 24 30 10 9 14 13 8 10 9 15 3 7 12 32 5 4 3 2 8 6 11 22 23 20 21 1 19 18 17 16 Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
