SPECIFICATIONS 2 Forged Safety Latch Hooks PERSONAL SAFETY 1. Stay alert. Watch what you are doing, and use common sense when operating. Do not use while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating may result in serious personal injury. 2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 3.
. Maintain tools with care. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired. 4. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. SERVICE 1. 2. Tool service must be performed only by qualified repair personnel.
UNPACKING 6 When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at: 1-800-444-3353 as soon as possible. 5 Spring hook up position OPERATION INSTRUCTIONS 1. Press the Stop Pawl (4) away from the Ratchet (5) allowing the Cable (8) to be pulled out to the correct length in order to reach your load. Then, release the Stop Pawl (4).
Releasing The Load WARNING: Make sure the load is on a flat, level surface before it is released. Releasing the load on a slope or uneven surface could result in workpiece loss of control, property damage, and/or personal injury. 1. Hold the release lever down by cranking the Handle (9) one notch tighter. As soon as the Pawls clear the ratchet tooth the unit will disengage. When loosening the Cable (8), slide the spring back to the other end of the slot, see Figure 2.
INSPECTION, MAINTENANCE, AND CLEANING 1. BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment. 2. Inspect the Cable (8) along its full length for kinks, frays or damage of any type.
ASSEMBLY DIAGRAM 1 3 4 5 2 6 7 8 10 9 11 Note: No replacement parts are available. ITEM 30131 For technical questions, please call 1-888-866-5797.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
