Product manual
Page 4SKU 96687 For technical questions, please call 1-800-444-3353.
Avoid accidental starting. Ensure the switch is in the off-position before c.
plugging in. Plugging power tools in with the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. d. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
Do not overreach. Keep proper footing and balance at all times. e. This
enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, f.
clothing and gloves away from moving parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
Power tool use and care4.
Do not force the power tool. Use the correct power tool for your application. a.
The correct power tool will do the job better and safer at the rate for which it
was designed.
Do not use the power tool if the switch does not turn it on and off. b. Any power
tool that cannot be controlled with the switch is dangerous and must be
repaired.
Disconnect the plug from the power source before making any c.
adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and do not allow d.
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained
users.
Maintain power tools. Check for misalignment or binding of moving parts, e.
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
Use the power tool in accordance with these instructions and in the manner f.
intended for the particular type of power tool, taking into account the working
conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
Service5.
a.
identical replacement parts. This will ensure that the safety of the power tool
is maintained.