Product manual

Page 11SKU 96687 For technical questions, please call 1-800-444-3353.
3. 

Put one of the washers onto the Arbor (19) and install the emery grinding wheel 4.
on the arbor (19). The bevel edge of the grinding wheel should face the M10 nut

Fasten the M10 nut (25) clockwise, put on the Disk Cover (26), secure using the 5.
three Screws (27).
Remove the hex key wrench. Never operate tool before taking off the hex key 6.
wrench or without the Disk Cover (26) mounted.
Lock Nut (85)
Spring (82)
Washer (84)
Pressure Bushing (81)
Saw Blade
Figure 1
Blade Rest (80)
7. Remove Lock Nut (83), Spring (82), Pressure Bushing (81) and all washers from
Blade Rest (80). Assemble saw blade onto the Screw as shown in Figure 1.