Product manual

Page 10SKU 96687 For technical questions, please call 1-800-444-3353.
Installing the Handle (60)
Handle (60)
Nut
Shaft (62)
1. Unscrew the nut on the Handle (60), install the Handle (60) onto the Shaft (62)
and secure the Handle with the Nut. See above.
Installing the Protective Guard
Protective
Guard (29)
Guard Mount (21)
Screw (28)
Nut (30)
1. 
with Screw (28) and Nut (30)
Installing the Grinding Wheel
Remove the three Screws (27) then take off the Disk Cover (26).1.
Insert the hex key wrench into the hole, turn the wrench counterclockwise to un-2.
screw the M10 nut (25).