Product manual

Page 4SKU 69626 For technical questions, please call 1-888-866-5797.
WIRING
Note: Some towing vehicles may already have a 4-way Flat Connector, “Trunk” plug
wired in. For those vehicles, skip the following wiring instructions.
If you do not have experience
doing this type of automotive
electrical wiring or if the
wiring in your vehicle differs
from that explained below,
have an automotive service
technician connect the wiring.
1. Identify the towing vehicle’s wires
in the trunk that correspond to
the circuits indicated in the Wiring
Color Code diagram to the right.
The white ground wire from the
Pigtail (22) may be connected to
a bolt or appropriate component
on the vehicle to establish a
ground instead of a ground wire.
2. Connect the wires from the Wiring Pigtail (22) to the proper vehicle circuit wires
using Wire Splices (21). When the supplied splices are used, generally no wire
stripping or cutting would be
required. Follow these three steps
and refer to the illustration to the
right:
a. Insert the end of the Pigtail
(22) wire into the ‘dead-end’
channel of the Splice. Insert
the wire all the way to the end
of the channel as shown.
b. Place the Splice around the
correct vehicle circuit wire.
c. Make sure both wires
stay properly in place
while the cover is closed
until it snaps together.
Wiring Color Code
Note: This is the wiring conguration of
the “Trunk” 4-way Flat Connector
(23). The towing vehicle may have
a different wiring color code.
WHITE
Ground
BROWN
Running Lights
YELLOW
Left Stop and
Turn Lights
GREEN
Right Stop and
Turn Lights
“Trunk” 4-way Flat
Connector (23)
Wiring
Pigtail (22)
Wire Splice (21) Usage
B) Place splice
around vehicle wire
C) Close Splice
cover securely
A) Insert Pigtail (22) wire
into ‘dead-end’ channel
UNPACKING
When unpacking, check to
make sure that the item is intact and
undamaged. If any parts are missing
or broken, please call Harbor Freight
Tools at the number shown on the cover
of this manual as soon as possible.
SPECIFICATIONS
Electrical
Requirements
12 VDC 4.3 A
Bulb Type
12 VDC 21/5 W
(#1157 Type)
Connector 4-way Flat