Specifications Electrical Requirements Connector Page 2 12 VDC 4-way Flat For technical questions, please call 1-888-866-5797.
Important Safety Information 1. Observe posted speed limits to prevent lights from blowing off. 2. Securely attach lights to vehicle before moving. Loose lights are a traffic hazard. 3. Thoroughly test vehicle lights and tow lights before use. 4. Mount lights in proper orientation. Amber lights must face forward and red lights must face backward. Improper orientation can confuse or distract drivers, causing a traffic hazard. 5. Install on a 12VDC negative ground circuit only.
Wiring Note: Some towing vehicles may already have a 4-way Flat Connector, “Trunk” plug wired in. For those vehicles, skip the following wiring instructions. If you do not have experience doing this type of automotive electrical wiring or if the wiring in your vehicle differs from that explained below, have an automotive service technician connect the wiring. 1. Identify the towing vehicle’s wires in the trunk that correspond to the circuits indicated in Figure A.
Set up 1. To help avoid scratches, clean the mounting locations and clean the protective labels under the lights. 2. Set the lights on the back of the vehicle being towed so that the RED side of each light faces backwards. Set the light that has a green wire on the right side and the light that does not have a green wire on the left side. 3. 4. 5. Make sure all wires are secured with enough slack to prevent binding when turning, but controlled enough to prevent roadway or moving part contact.
Parts List and Diagram Part 1 2 3 4 5 6 7 8 9 10 11 Description Amber Front Lens Red Rear Lens Bracket Circuit Board with Amber LED Circuit Board with Red LED Shell Screw Cover Magnet Nut Screw Qty 2 2 2 2 2 2 2 2 2 2 8 Part 12 13 14 15 16 17 18 19 20 21 22 Description Power Cord “Trailer” 4-way Flat Connector Left-Right Cord LED Wire Wire Splice Wiring Pigtail “Trunk” 4-way Flat Connector Protective Label Screw (M3 x 16) Nut (M3) Metal base Qty 1 1 1 6 4 1 1 2 4 4 2 Record Serial Number Here: Note:
Assembly Diagram Item 69869 For technical questions, please call 1-888-866-5797.
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
