Product manual

Page 7For technical questions, please call 1-888-866-5797.Item 61911

Record Serial Number Here:

Note: If product has no serial number, record

month and year of purchase instead.

Note: Some parts are listed for illustration

purposes only, and are not available

individually as replacement parts.

Maintenance Instructions

Procedures not specifically explained in this manual must be performed only by

a qualified technician.

TO PREVENT SERIOUS INJURY: Unplug the charger, disconnect

any battery, and allow charger to cool completely before performing

any inspection, maintenance, or cleaning procedures.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:

Do not use damaged equipment. If abnormal noise or vibration occurs,

have the problem corrected before further use.

1. BEFORE EACH USE, inspect the general

condition of the charger. Check for:

• loose hardware,

• cracked or broken parts,

• damaged electrical wiring or

cable insulation, and

• any other condition that may

affect its safe operation.

2. If the fuse needs replacing:

a. Disconnect the Connector from the

AC Adapter and/or the battery.

b. Uncap the Fuse Housing.

c. Remove the spent fuse and replace

with a new 7.5 Blade-type fuse.

d. Recap the Fuse Housing.

Note: Aside from the fuse, this device does

not contain any user replaceable parts. If it

needs service, take it to a qualified technician.

3. AFTER USE, wipe external surfaces

of the tool with clean cloth.

WARNING! If the supply cord

of this charger is damaged, it must

be replaced only by a qualified

service technician. DO NOT OPEN

CHARGER HOUSING, NO USER-

SERVICEABLE PARTS INSIDE.

Parts List

Part Description Qty

1 AC Adapter 1

2 Ring Terminal Connector 1

3 Clip Connector 1