Product manual

Page 5For technical questions, please call 1-888-866-5797.Item 61911
Specifications
Input 120VAC, 60Hz, 0.25A
Rated Output 0.75 A /12 VDC
Maximum Output 13.2 VDC
Battery Capacity 5 – 125 Ah
Cable Length 12 ft.
Fuse 7.5A Blade-type
259927
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this document including all text under subheadings therein
before set up or use of this product.
Note: This Float Charger is intended only to keep a fully charged battery from
losing its charge. It will not work to charge a battery that is discharged or damaged.
TO PREVENT BATTERY DAMAGE:
Do not use on gel lead-acid type batteries.
Note: Check battery voltage with a multimeter before use.
The Battery MUST be fully charged to at least 12 Volts.
The Float Charger prevents self-discharge of the battery, while maintaining the life of
rechargeable 12 volt lead-acid batteries. It maintains a battery charge for batteries rated
from 5 – 125 Ah (amp-hours), by providing a 13.2 VDC maximum output. Other types of
chargers provide a strong, rapid charge but tend to boil out liquids and decay electrodes.