Product manual

Page 7For technical questions, please call 1-888-866-5797.Item 68012
SAFETYOPERATIONMAINTENANCE SETUP
Specifications
Charger Input Rating 120VAC / 60Hz
Battery Rating 12V / 1300mAh
Battery Type Li-ion
No Load Speed 10,000-18,000 OPM
Accessories Hex Key
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Diagram on page 11.
Functions
Speed Control Knob Power Switch
Sanding Pad
Battery Pack
Note: Sanding Pad sold separately.
Figure A
Charger Indicator LED’s
1. The green LED lights once Charger is plugged in.
2. The red LED will light during charging.
3. When Battery Pack is fully charged,
both red and green LED’s will stay lit.
4. If both red and green LED’s flash, the charger and/or
battery are not functioning properly. Stop charging
immediately and contact a qualified technician.
Green LED
Red LED
Figure B