Product manual

Page 10 For technical questions, please call 1-888-866-5797. Item 69360
Tool Set Up
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Release the Trigger and remove
the Battery Pack before adjusting
tool or installing accessories.
BIT INSTALLATION:
1. CAUTION! Let bit cool before
touching, changing or adjusting it.
Bits heat up dramatically while in use,
and can burn you.
2. Slide Direction Selector to its mid-
position.
3. While holding ring behind collar of
Chuck with one hand, rotate collar
counterclockwise to open jaws.
4. Insert shank of drill bit or other accessory
into chuck.
5. Turn collar clockwise to hand tighten.
CAUTION! To prevent injury, do not
squeeze Trigger to release or tighten
chuck.
Work Piece and Work Area Set Up
1. Designate a work area that is clean and
well-lit. The work area must not allow
access by children or pets to prevent
distraction and injury.
2. Secure loose work pieces using a vise
or clamps (not included) to prevent
movement while working.
3. There must not be objects, such as utility
lines, nearby that will present a hazard
while working.