Product manual

Page 4 For technical questions, please call 1-888-866-5797. Item 32888
SAFETY OPERATION MAINTENANCESETUP
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Assembly Diagram on page 10.
Functions
Roller
Cotter
Pin
R-Pin
(on back)
Fulcrum
Piston
Ram
Ram
Handle
Release
Valve
Fill Plug
(on back)
Mounting
Hole
Mounting
Hole
1/2"
3/4"
1"
1"
2"
2"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
3/4"
1/2"
Figure A
Mounting
WARNING! Attach Pipe Bender securely to solid and level surface that can support
weight of Pipe Bender and pipe, with enough clearance for movement of pipe. Do not lay
pipe bender on its side. The hydraulic ram may leak and not function properly.
Note: Verify that mounting surface has no hidden
components before drilling or driving bolts.
1. Use base to mark mounting holes
on mounting surface.
2. Mount base to mounting surface
using appropriate hardware.