Product manual

Page 6
For technical questions, please call 1-800-444-3353.
Items 60344-47
SAFETY OPERATION INSPECTIONINSTALLATION
Operation Instructions
Read the
ENTIRE
IM
P
ORTANT SAFET
Y
INFORMATION
Y INFORMATIONY
section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO
P
REVENT SERIOUS INJUR
Y
REVENT SERIOUS INJURYREVENT SERIOUS INJUR
: Operation of a
vertical
hoist involves more than
depressing
the U
P
or DOWN
control
. The use of
vertical
. The use of vertical. The use of
hoists is subject to certain hazards that cannot be
met by mechanical
means, but only by the exercise of intelligence, care, common sense, and
experience in anticipating the motions that will occur as a result of operating the controls.
Before Operating Hoist
1.
Familiarize yourself with all operating controls
of the hoist and with the operation(s) to be
performed. Instructions include, the warnings
on the hoist, and the safety and operating
instructions portion of this manual.
2.
WARNING!
TO
P
REVENT SERIOUS INJUR
Y
REVENT SERIOUS INJURYREVENT SERIOUS INJUR
FROM
HOIST FAILURE:
Do not use damaged equipment.
If
adjustments or repairs are necessary,
If adjustments or repairs are necessary, If
or any defects are known,
have the
problem corrected before further use.
3.
Do not operate a hoist with an out-of-order sign.
4.
Only a qualified technician should
perform maintenance to the hoist.
5.
Do not use the wire rope as a ground for welding.
Do not touch a welding electrode to the wire rope.
6.
Designate a work area that is clean and well
-
lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
7.
Route the power cord along a safe route to reach
the work area without creating a tripping hazard or
exposing the power cord to possible damage. The
power cord must reach the work area with enough
extra length to allow free movement while working.
8.
There must not be objects, such as utility lines,
nearby that will present a hazard while working.
9.
Inspect the hoist as explained in Frequent
Inspection
on page
8 after installation but before use.
Operating
C
ontrols
C
ontroller
Stop
Bracket
P
ulley
Hook
End Hook
Retract
C
able
(raise hook)
Extend
C
able
(lower hook)
25% Duty
C
ycle
2 minutes, 30 seconds
in
use
followed by
at least
7 minutes,
7 minutes,
30
seconds off
(Items 60346/60347)
20% Duty
C
ycle
2 minutes
in use
followed by
at least
8 minutes
off
(Items 60344/60345)
This Hoist has a 20% or 25% duty cycle. This means that
it may only be run up to 2
minutes at a time
(2 minutes, 30
seconds in use for 60346/60347)
and then it must be allowed to rest for at least 8 minutes
(7 minutes, 30
seconds off for 60346/60347)
before further use.