Product manual

Page 2
For technical questions, please call 1-800-444-3353.
Items 60344-47
SAFETY OPERATION INSPECTIONINSTALLATION
Table of
C
ontents
Safety
.........................................................
2
Specifications
.............................................
5
Installation
..................................................
5
Operation
....................................................
6
Inspection
...................................................
8
Parts
Lists and Diagrams
..........................
10
Warranty
....................................................
12
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if
not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if
not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate
injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INFORMATION
TO
P
REVENT SERIOUS INJUR
Y
REVENT SERIOUS INJURYREVENT SERIOUS INJUR
AND DEATH:
Y AND DEATH:Y
Basic Safety Information
1.
To Reduce the Risk of Electric Shock or Injury,
Use Indoors Only.
2.
Do not
lift
more than rated
load. Be
aware of
dynamic loading!
Sudden
load movement may
briefly create excess load causing product failure.
3.
Do not operate when load is not
centered underneath.
4.
Do not operate hoist with twisted, kinked, or
damaged wire rope.
Inspect wire rope carefully before every use.
5.
Do not operate a damaged or
malfunctioning hoist.
Inspect hoist carefully
and test
operation before every use.
6.
Do not lift people or lift
loads
over
people.
Falling
loads
can
injure or kill people.
7.
Do not operate with rope not
centered in its groove.
8.
Do not remove or cover warning
labels and/
or tags.
These carry important
safety
information.
If
unreadable or
missing, contact
Harbor
Freight
Tools for a
replacement.
9.
WARNING: Handling the cord on this product will
expose you to lead, a chemical known to the State of
California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5,
et seq.
)
10.
The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the
operator.