Product manual

Page 6 For technical questions, please call 1-800-444-3353. Item 69148
General Operating Instructions
1. Unfold the Handle (101) by lifting it up to a
vertical position until it locks in place.
2. Before placing anything on the cart, lock the back
two casters. The Locking Swivel Casters (118)
can be locked by pressing the lever down into
the locked position with your foot. Test the cart
operation using the Foot Pedal (139) and Control
Lever (102). Make sure the Table (141) raises and
lowers properly before adding weight to the Table.
3. Observing safe lifting procedures, move
the work piece onto the cart. If necessary,
secure the item onto the cart using tiedowns
or chocks to keep it stable while moving.
4. Release the Locking Swivel Casters by
moving the levers to the unlock position. Move
the work piece to the desired location.
5. Before raising the workpiece, re-lock
the Locking Swivel Casters.
6. To raise the Table, ensure that the Control Lever
is in the released position. Press repeatedly
on the Foot Pedal to raise the table.
7. To lower the Table squeeze the Control Lever. The
Table has a 2-speed valve. Squeeze the Lever
halfway for slowly lowering a load. Squeeze it
fully for quickly lowering the Table when empty.
8. To prevent accidents, when finished using
the cart, move the cart to a safe location,
lock the Locking Swivel Casters, lower the
Table as far as it will go. Clean, then store
the cart indoors out of children’s reach.
SAFETY OPERATION MAINTENANCESETUP