SAVE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
GENERAL SAFETY RULES WARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. The term “tool” in all of the warnings listed below refers to your Engine Support. SAVE THESE INSTRUCTIONS 1. Work area safety a. Keep work area clean and well lit. Cluttered or dark areas invite accidents. b. Keep children and bystanders away while using the Engine Support. Distractions can cause you to lose control. 2. Personal safety a.
SPECIFIC SAFETY RULES 1. Maintain labels and nameplates on the tool. They carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 2. This product is not a toy. Keep it out of reach of children. 3. Use the Engine Support for short-term lifting projects only. The Engine Support is not constructed to endure extended term use. 4. Never exceed the maximum weight limit of 1,000 Pounds. 5.
SET UP INSTRUCTIONS Read the ENTIRE IMPORTANT SAFETY INFORMATION sections at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Assembly 1. Using provided Nuts (2) and Bolts (4), attach Standing Blocks (3) to Standing Brackets (1) for both sides of the Engine Support. Tighten the Nuts (2). 2.
. Turn the Handles (10) clockwise until the Chains are taut and the engine is held securely. 7. Loosen engine mounts. Turn the Handles (10) at 1/4” clockwise turns until the entire engine’s weight is supported by the chains. Additionally loosen/disconnect the engine mounts. 8. Never work on the engine while it is supported only by the Engine Support.
PARTS LIST Part 1 2 3 4 5 6 7 Description Qty Standing Bracket Nut M10 Standing Block Bolt M10x30 Beam Small Washer Wing Screw 2 2 2 2 1 2 2 Part 8 9 10 11 12 13 14 Description Qty Rubber Grip Large Washer Handle Support Screw Chain Rubber Cushion Washer 10 4 2 2 2 2 4 2 ASSEMBLY DIAGRAM 7 8 6 10 5 14 9 11 2 3 12 4 1 13 Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead.
90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
