Product manual

Page 5
For technical questions, please call 1-800-444-3353.
ITEM 61356
Setup and Operation Instructions
Read the
ENTIRE
IMPORTANT SAFETY INFORMATION
section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY AND DEATH:
Before loading or unloading turn vehicle’s engine off, set its transmission
in gear or park, engage its emergency brake and block its wheels.
Make
sure the Ramps are clean and dry before loading or unloading.
Setup
1.
The tailgate the Ramps will sit
on and both of the Ramps must
be dry and clean. Check
for
and
tighten any loose hardware.
2.
Sit the Tongue (angled lip) of the
Ramps on the tailgate. The Tongue
must face down, and fully contact
the truck’s tailgate. Extend the
Safety
Chain on each Ramp up
into the inside of the truck bed;
attach
each
Safety Chain to a secure
attachment point on the truck chassis.
WARNING!
CONNECT SAFETY CHAINS
TO SECURE ATTACHMENT POINTS
WITHIN THE TRUCK BED ABLE TO
WITHSTAND THE PULLING FORCE
OF LOADING. THEY MUST ALSO
BE TAUT ENOUGH TO PREVENT
THE RAMPS FROM COMING OFF
THE VEHICLE BEING LOADED.
3.
Pull the Ramps backwards
until the Chains are
tight.
The
entire
Tongue
portion of the Ramps
must fit onto the tailgate; if not, adjust
the Safety
Chains accordingly.
Chain
Adjustment
1.
Loop the chain through the anchoring
point on the truck and hook it to itself.
2.
Adjust the other chain to equal length.