Product manual
Page 2 For technical questions, please call 1-800-444-3353. Dual Ramps
Specifications
Capacity 1,000 lb. combined,
500 lb. individually
(Static Conditions)*
Max. Tailgate Height 36″
Dimensions 72″ L x 9″ W x 2″ H
Important Safety Information
1. Before use:
a. Read and understand manual.
b. Inspect before every use; do not
use if parts loose or damaged.
c. Turn vehicle’s ignition OFF
and set parking brake.
d. Clean dirt, oil and debris off
ramps and allow ramps to dry.
e. Set up only on solid,
level, dry surface.
f. Turn ramps so flange end faces
downward. Position ramps so that
tongues fully contact tailgate.
g. Properly connect safety chains.
2. Load vehicle slowly. Do not
ride vehicle down ramps.
3. Do not exceed 500 lb. capacity per
ramp or 1,000 lb. capacity evenly
distributed across two ramps.
Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
4. Use safety chains as intended only.
5. Use as intended only. Do not use:
a. as ladder,
b. to load/unload 3-wheeled vehicles,
c. if tailgate on carrying vehicle
is higher than 36″, or
d. to load vehicle with wheel
width wider than ramp.
6. Ground contact. Use your Ramps
on a solid, level, flat, dry surface.
Make sure the Tongue edge fully
contacts the tailgate of the vehicle.
7. Clean Ramps. Prior to each use,
clean dirt, oil, or any debris off ramps.
8. Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
9. This product is not a toy. Do not allow
children to play with or near this item.
10. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.