Product manual

Page 6 For technical questions, please call 1-888-866-5797. Item 68827
SAFETY OPERATION MAINTENANCESETUP
Essential Straight Push-stick
Features and Functions
Note: Straight style (traditional) stick shown. A different stick design
may be used if it properly protects against all hazards.
Diagram not to scale.
• Push sticks must be made from sturdy, defect-free, plywood or
normal wood to prevent unexpected breakage. Material must
be at least 1/4" thick, but no thicker than the nished wood.
• Inspect push stick before use and do not use
a damaged or deteriorated push stick.
• Push stick dimensions will vary depending
on the application and user.
Handle Notch
• Must be far
enough down
the stick to allow
a comfortable
and rm grip.
• Must be deep enough
to prevent hand from
slipping down the stick.
• Do not cut more than
halfway into the stick to
prevent weakening.
• Corners may be rounded
to increase comfort.
Stick Length
• Must be long enough to
keep hand clear of blade.
• At least 6" from end
of handle to closest
part of notch.
Notch
• Must be right (90°) angle, cut at 30°-40° from the angle of
the stick to keep hands out of the line of the blade.
• The lower lip of the notch must be no longer than the workpiece is thick.
At Least 6"
Less than
workpiece
thickness
NOT TO SCALE.
90°
30°-40°