Product manual

Page 9For technical questions, please call 1-888-866-5797.Item 61490
SAFETYOPERATIONMAINTENANCE SETUP
Break-In Procedure
1. Turn the Power Switch OFF and unplug the unit.
2. Insert a male coupler (sold separately) into the Quick
Coupler (76) and fully open all regulators and valves.
3. Plug in the Power Cord.
4. Turn the Power Switch ON.
5. Let the unit run for 30 minutes.
Air will expel freely through the Coupler.
6. Turn the Power Switch OFF.
7. Unplug the Power Cord and
remove the male coupler.
Note: Change the compressor oil after the
first hour of use to remove any debris.
Sample Air Line Setup
1. Connect a regulator valve, an inline shut off valve
and a 1/4″ NPT air hose to the Quick Coupler
(all sold separately). The air hose must be long
enough to reach the work area with enough extra
length to allow free movement while working.
Note: An in-line shutoff ball valve is an important
safety device because it controls the air supply even
if the air hose is ruptured. The shutoff valve should
be a ball valve because it can be closed quickly.
2. Depending on the tool that will be used
with this compressor, incorporate additional
components, such as an in-line oiler, a filter,
or a dryer (all sold separately). Consult the air
tool’s manual for needed accessories.