Product manual
Page 5For technical questions, please call 1-800-444-3353.Item 93358
Assembly
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
IMPORTANT–READ THE FOLLOWING CAREFULLY BEFORE PROCEEDING
• Thefirststepinassemblyistoassembleaproperbase.Thegreenhousemustbeproperly
supported to help prevent property damage and injury in the event of strong winds or
inclement weather. Wind and ground conditions may vary from site to site, and may affect
the practicality and effectiveness of anchoring methods substantially. If you have any doubt
regarding the stability of the base/foundation you are to use, consult a professional.
• Itisalwaysyourresponsibilitytoensurethatthegreenhouseisproperlyanchored.
Harbor Freight Tools cannot be held responsible for personal injury, damage to the greenhouse,
or other property damage that occurs as a result of improperly anchoring the greenhouse.
• Becertaintocheckwithlocalauthoritiestoobtainallrequiredbuildingpermits
and to familiarize yourself with any building codes that may apply.
• Decideonalocationforthegreenhouse.Thelocationshouldoptimallybea
level, well-lit area that is sheltered from the wind. The door of the greenhouse
should not open towards the prevailing wind, if possible.
IMPORTANT ASSEMBLY TIPS
• AssembleBoltswiththeirheadsfacingtheoutsideofthegreenhouse,unlessstatedotherwise.
Tighten Nuts (67) only about 1/4 turn past finger-tight; be careful not to overtighten.
• Layoutallpartsbynumberpriortoassembly.
• Atleasttwoassistantswillbenecessaryduringassembly.
• Assembleonaclear,calmday.WindwilldamagetheGreenhouseandmakeassemblydifficult.










