Product manual

Page 25For technical questions, please call 1-800-444-3353.Item 93358
38
39
61
39
40
41
71
5. Attach the Window Brace (41) to the
Bottom Window Frame (40) using 2
Window Screws (71). The holes on the
Window Brace (41) should face away
from the window, as shown below.
6. Hold the assembled window level with the ground at the outer
edge of the Crown (10, 11). Slide the top edge of the Top
Window Frame (38) into the slot at the top of the Crown (10, 11),
see illustration to the left. Align the window with the Window
Brace (41) underneath it. Slide the window into place over the
Window Support Beam (42). Gradually lower it into place.
7. Loosen the Nuts (67) holding the Window Support
Beam (42) in place and slide the Window Support Beam
(42) up to touch the window. Secure it in place.
8. Repeat the steps in this phase for all four windows.
Crown
(10, 11)
Top Window
Frame (38)
(View from end of Crown.)