Product manual

Page 24 For technical questions, please call 1-800-444-3353. Item 93358
Phase 10: Window Assembly and Installation
Parts in this phase are fastened
using
16 Normal Bolts (65),
16 Nuts (67),
and 8 Window Screws (71).
1. Attach the Side Window Frames (39) to the
Top Window Frame (38), as shown to the left. The threaded
shafts of the Bolts should extend out the bottom of the window.
2. Insert Normal Bolts (65) into the holes at other
end of the Side Window Frames (39), so that the
threads stick out the bottom of the window.
38
39
65
67
38
39
39
(View from underneath
window, flat side of pieces.)
65
67
65
65
65
67
3. Remove the protective film from
both sides of the Window Pane (61).
Slide the Window Pane (61) into the three-
sided frame.
4. Slide the Bottom Window Frame (40)
onto the 2 Normal Bolts (65) and the
Window Pane (61). Secure it in place
with Nuts (67). Press on the heads of
the Bolts through the Window Pane to
allow the Nuts to thread on properly.
(View from underneath
window, flat side of pieces.)
38
39
61
40
65
65
39
67
67