Product manual

Page 5For technical questions, please call 1-888-866-5797.Items 41188 69513
Assembly Instructions
Attaching Posts to I- Beam
Hardware - 8 each:
Threaded
Shaft Size
(29) Beam
Bolt M12 x 35
(15) Spring
Washer M12
(19) Washer
M12
(16) Nut
M12
1. Lay I-Beam (4) on the ground. Lay left
and right Post Assemblies on the ground
so Pulleys and cables are facing out.
Left Post
Assembly
Right Post
Assembly
I-Beam
(4)
Figure A
2. Attach Left Post Assembly to I-Beam
using four Beam Bolts (29), Washers (19),
Spring Washers (15), and Nuts (16).
3. Tighten connections securely.
4. Repeat for right Post Assembly.
I-Beam
Spring
Washer (15)
Beam
Bolt (29)
Nut (16)
Washer
(19)
Left Post
Assembly
Figure B
SAFETYOPERATIONMAINTENANCE ASSEMBLY