Product manual

Page 4 For technical questions, please call 1-888-866-5797. Items 41188 69513
Specifications
Load Rating 2,000 lb
Minimum Overall Height 99"
Maximum Overall Height 147-1/2"
Overall Width 128"
Minimum Vertical Clearance* (under I-Beam) 94"
Maximum Vertical Clearance* (under I-Beam) 142-1/2"
Clearance Between Posts 93-11/16"
I-Beam 3″W x 5″H
* Factor in size of beam trolley and hoist when determining required clearance.
Assembly
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY AND DEATH:
Wear ANSI-approved safety goggles, hard hat,
heavy-duty work gloves, and steel-toed work boots
during assembly and operation.
The correct bolts must be used during assembly. If any doubts arise regarding proper
assembly, contact Harbor Freight at the number at the bottom of this page before use.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Assembly Diagram on page 18.
Assembly Setup
1. More than one person will be
needed for assembly.
2. Use a large, clean and uncluttered
area for assembly.
3. Consider vertical clearance when
choosing operation area. Assemble
close to operation area.
4. Use saw horses (not included) to
support larger items such as Posts
and I-Beam during assembly.
5. The Post Insert (1) and Post Sleeve (2)
are pre-assembled.
SAFETY OPERATION MAINTENANCEASSEMBLY