Product manual

Page 8 For technical questions, please call 1-888-866-5797. Item 61858
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. BEFORE EACH USE, inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2. Before each use, thoroughly test the Ram
for proper operation prior to its actual use.
If the Ram appears to not be working properly,
follow Bleeding instructions on page 7.
3. Change the hydraulic oil at least
once every three years:
a. With the Ram fully lowered, remove the Oil
Filler Plug on the side of the Housing.
b. Tip the Ram to allow the old hydraulic oil
to drain out of the Housing completely,
and dispose of the old hydraulic oil in
accordance with local regulations.
c. With the Ram upright, completely fill the Housing
with a high quality hydraulic oil (not included) until
the oil just begins to run out of the Oil Fill Hole.
d. Open the valve Release Screw and pump
the Handle to bleed air from the system.
e. Reinstall the Oil Filler Plug.
4. Wipe dry with a clean cloth. Then, store the
Ram in a safe, dry location out of reach of
children and other non-authorized people.
SAFETY OPERATION MAINTENANCESETUP