Product manual

Page 5For technical questions, please call 1-888-866-5797.Item 61858
1.
Figure A
Large
Caster
Nut
Large Caster Bolt (1B)
Lock
Washer
Washer
Base
To attach two Large Casters to the rear section of the
Base, align the four mounting holes in each Large
Caster with the four mounting holes on the underside
of each Base end. Secure in place using four Large
Caster Bolts, Washers, Lock Washers and Nuts.
2.
Washer
Lock Washer
Small Caster Bolt (1B)
Small
Caster
Base
Figure B
To attach two Small Casters to the front section
of the Base, align the four mounting holes in each
Small Caster with the four mounting holes on the
underside of each base end. Secure in place using
four Small Caster Bolts, Washers and Lock Washers.
3.
Figure C
Large
Caster
Large Caster Bolt (1B)
Leg
Nut
Lock
Washer
Washer
To attach one Large Caster to the end of each Leg,
align the four mounting holes in each Large Caster
with the four mounting holes on the underside
of each Leg. Secure in place using four Large
Caster Bolts, Washers, Lock Washers and Nuts.
Figure D
Legs
Base
4. Slide Legs into front of the Base.
Figure E
Front
Lock Pin
Rear
Lock Pin
R-Pins
5. Lock Legs in place using the Lock Pins. To
insert the Lock Pins, lift up on front of Base
until holes line up. After all four Lock Pins are
inserted, insert one R-Pin through small hole at
end of each Lock Pin until it snaps into place.
Note: Make sure Lock Pins are
secure before proceeding.
Figure F
Washers
Post
Base
Frame Bolt (9)
Nuts
6. Use the Frame Bolts, Washers, and Nuts to secure
the bottom of the Post to the Base.
SAFETYOPERATIONMAINTENANCE SETUP