Product manual

Page 8 For technical questions, please call 1-800-444-3353. Item 60732
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. BEFORE EACH USE, inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• proper Ram operation, and
• any other condition that may
affect its safe operation.
2. Lubricate the Grease Fitting with a grease
gun once a month, or when the Boom
becomes difficult to swivel on the Post.
Note: If Crane will be exposed to wet
conditions, more frequent lubrication may
be necessary to prevent buildup of rust.
3. Change the hydraulic oil at least once every year:
a. Remove Ram from Crane. Lower ram completely.
b. Remove Oil Fill Plug.
c. Tip Ram to allow old hydraulic oil
to completely drain out.
d. Dispose of old hydraulic oil in
accordance with local regulations.
e. With the Ram upright, fill with hydraulic
oil (sold separately) to full level.
f. Open Valve Release Screw and pump the
Handle to bleed air from the system.
g. Reinstall Oil Fill Plug.
h. Reinstall Ram to Crane.
4. Top assembly may be removed and stored indoors
in a dry, safe place out of the reach of children.
SAFETY OPERATION MAINTENANCESETUP